Technologically advanced hydraulic pumps, motors and, in particular, the first mobile lifting crane all originated from technology used by Eric Sundin for ski production in Hudiksvall. Ever since its foundation in 1925, Sunfab has been a family company characterised by innovation, skills and visions of the future.
After more than 90 years, the third generation of the Sundins are still running the company in the spirit of Eric Sundin, with a family atmosphere, flexibility and innovative solutions. Today, Sunfab is a world leader in hydraulics.
Our head office is located in Hudiksvall, Sweden, where Sunfab´s products are manufactured in the company´s own factory. Our subsidiary companies can be found in Germany, France, the UK and Spain. We also sell our products via distributors and direct to customers all over the world.
Sunfabs founder, Eric Sundin, started a factory in Arbrå 1925 to produce skis under the name Sundins. The Swedish military became aware of the innovative ski manufacturer and began buying large quantities of skis, whereupon the company grew rapidly. After a fire in 1927, the ski factory moved from Arbrå to Hudiksvall. The company grew quite rapidly from its early premises. In 1936 Eric Sundin bought an old industry plant at Hudiksvall harbour, where operations were moved.
Hiab is founded
Eric constantly had new inventions in the pipeline. They used more and more hydraulics in the production and their knowledge increased, this resulted in that Eric Sundin together with the builder Einar Frisk founded Hydrauliska Industriaktiebolaget − Hiab.
One of the greatest inventions came in 1947, when they created the world's first mobile hydraulic crane. It was also the starting point for Hiab, a company that would revolutionize cargo handling worldwide.
Sunfab is founded
In the following years product development continued and soon they needed new technology to give the cranes higher performance. 1952 Eric formed a new company, Sunfab for the development of hydraulic products. Two years later they created Sunfab’s first hydraulic piston pump for trucks.
From skis to pumps
In the 1960s, Sundins was one of the world's largest ski manufacturers. In addition, demand increased constantly, both at Sunfab pumps and Hiab cranes. It was too much for a family to manage themselves. Therefore in 1965 Hiab was sold to an investment company. Eric Sundin, however, continued to work on Sundin's factories until he passed away in 1975.
In the 80s competition increased from ski manufacturers all around Europe, which resulted in Sundins discontinued its ski manufacturing, 1989.
The start of Sunfab
In the early 90s Sundin's factories changed name to Sunfab Hydraulics AB. In addition to that they developed the well-known SC-pump they also developed a hydraulic motor. By this time Sunfab delivered about 8 000 pumps a year.
Exports to over 40 countries
Today, the number of sold pumps and motors is over 40 000 a year and Sunfab is a well known brand all over the world. Approximately 90% of production is exported to about 40 countries around the world.
Sunfab's product quality is world famous. Our Pumps and Motors undergo stringent testing in our own lab and test rigs during production to ensure unsurpassed reliability in the field. Our innovative Research & Development Department works partly with new development. An equally important work area is further development, i.e. upgrading and developing existing products.
The department also works with customer modifications of products, Tech-mail customer support, product training, production support and the operation and development of Sunfab’s test lab.
Cutting edge IT-technology, together with high quality sensors and control components, produce the requisite conditions for structured and accurate measurement results.
Our Research & Development Department is pleased to answer customers' technical questions on the e-mail address firstname.lastname@example.org
Goods reception, delivery inspection and shipping. Packaging and shipping of pumps, motors and accessories.
Shown from the left: Per Åkerström, Ulf Jansson, Joakim Ahlbom, Håkan Nybom
Missing in image: Åsa Lindh, Tord Andersson, Hans Lindberg, Erik Eriksson
Manufactures our angle housings, bearing housings, shafts and SL blocks. This is done with four multi-operation lathes and three multi-operation mills linked to a Fastem rack.
From top left: Per-Erik Ahlström, Per Olsson, Erik Berlin, Daniel Bergqvist
From bottom left: Jonas Palm, Mikael Lundell, Arvid Bäckman, Stefan Söderström
Missing in image: Markus Klang
Manufactures our shafts and pistons. This is done with six grinders, one mill, two NC lathes and one robotic cell.
Shown from the left: Åsa Norling, Kjell Holmberg, Hans Eriksson
Missing in image: Stefan Jonsson, Kurt Bovbjerg, Peter Fagerström
Manufactures our cylinder blocks, accessories, connection covers and certain angle housings.
Shown from the left: Hans-Olov Ahlström, Per-Olov Munther, Rickard Modin, Börje Sandberg, Lena Munther, Roger Jonsson, Johan Carlsson, Åke Sandberg
Missing in image: Marcus Mokko
Assembles and tests all our pumps and motors.
From top left: Lasse Svensson, Andreas Berqvist, Jeanette Löfgren, Olle Jonsson
From bottom left: Faruk Kucukovic, Michelle Sjöberg, Lasse Englund, Ulf Svedberg, Anki Wallin
Missing in image: Björn Holmberg
Orders and carries out preventive maintenance, troubleshooting and repair of all machinery.
Shown from the left: Hans Andersson, Gunnar Erixon, Anders Granath
Our quality system is certified according to SS-EN-ISO 9001: 2008. Sunfab runs a process oriented business. The processes are the basis for our quality management system, which also include our environmental management system.
The targets of the processes are linked to the overall targets of Sunfab in order to achieve satisfied customers.
We shall work actively to prevent errors and constantly improve our quality together with our customers and suppliers.
THIS MEANS THAT:
We continuously work to reduce and prevent quality deficiencies in our products and services.
We acknowledge stated methods, specifications and drawings in our daily work.
We deliver products and services that fulfil the expectations of our customers.
We continuously improve in order to increase our competitiveness.
We adopt laws and requirements on our business.
We continuously improve our quality management system.
We review our quality policy once a year.
The Sunfab environmental management system was certified according to SS-EN ISO 14001:2004 in June 2011.
The environmental aspects are a natural part in all decisions made.
THIS MEANS THAT:
We fulfill or surpass laws and regulations
We strive to reduce the consumption of energy and water
Accidents and illness is prevented at our workplace
We take the full life of the product into account in our product development
All employees contribute to the creation and maintenance of a good environment. This is ensured through a daily environmental consideration, for instance through energy savings and sorting of waste.
Sunfab can offer ATEX classification of its standard ranges of pumps (SAP & SCP) and motors (SCM). The products satisfy the requirements defined in accordance with ATEX Directive 2014/34/EU on non-electrical equipment.
WHO ARE WE AND WHAT DO WE STAND FOR?
Our vision guides us, our strategy defines our goals.
Our common values are the foundation we stand on both as individuals and as a company.
WE ARE A COMPANY WITH HERITAGE AND PROUD INDIVIDUALS
WE ARE SUNFAB!
We have no job vacancies at the moment. However, if you would like to be part of our team, please register your interest by sending your CV to email@example.com
Working at Sunfab AB
Sunfab AB is a family company characterised by innovation and visions of the future. Wide-ranging technical expertise is gathered within Sunfab’s walls. Our pumps and motors undergo testing in our own laboratory and test cells during production and so are reliable in operation. The company is now a world leader in the field of hydraulics.
New challenges are developing us and our customers, too. The company is still run in the innovative spirit of our founder, Eric Sundin, with the focus on flexibility and novel technical solutions. We have an ultra-modern production facility that was inaugurated in 2006. It is equipped with the very latest technology, operated by experienced NC operators and maintained by our own service technicians. All products have been assembled on site with “know-how” since 1954.