SLP 040-106 DIN SAVTEC
SLP 040-106 DIN Savtec is equipped with a shut-off valve, this makes it possible to control so that oil only feeds when required.
SLP 040-106 DIN Savtec´s valve is available as pneumatic remote control. The signal is obtained from a panel switch or automatically from, e.g. the parking brake, pressure sensor or diode gate.
Product Benefits
![]()
Independent direction of rotation
![]()
A cost effective total solution in relation to a conventional installation using two pumps in a splitter gear box
![]()
Smooth operation over the entire speed range
![]()
Long life due to high demands on material selection, such as bearings, seals, etc.
![]()
O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
![]()
Extremely low noise emission over entire speed and pressure ranges
![]()
The Savtec valve can also be used as an emergency stop
Technical specifications
SLP 040-106 DIN | 040 | 056 | 060 | 070 | 077 | 084 | 092 | 096 | 106 | |
|---|---|---|---|---|---|---|---|---|---|---|
Theoretical oil flow l/min at pump speed | ||||||||||
rpm | 500 | 20 | 28 | 30 | 34 | 38 | 41 | 46 | 48 | 52 |
Displacement | ||||||||||
cm3/rev | 40.8 | 55 | 61.1 | 67.8 | 77 | 82.4 | 91.6 | 94,6 | 105.2 | |
Max pump speed | ||||||||||
rpm | 2200 | 1800 | 2200 | 2200 | 1600 | 1800 | 1800 | 1600 | 1600 | |
Max pump speed, relieved | ||||||||||
rpm | 3000 | 2500 | 3000 | 3000 | 2500 | 2500 | 2500 | 2500 | 2500 | |
Max working pressure | ||||||||||
bar | 350 | 350 | 350 | 330 | 350 | 350 | 330 | 350 | 330 | |
Weight | ||||||||||
kg | 22.0 | 22.0 | 22.0 | 22.0 | 22.0 | 22.0 | 22.0 | 22.0 | 22.0 | |
Tare-weight torque (M) | ||||||||||
Nm | 26.5 | 26.5 | 26.5 | 26.5 | 26.5 | 26.5 | 26.5 | 26.5 | 26.5 | |
Direction of rotation | ||||||||||
Independent | ||||||||||
Maximum pressure combined with maximum speed is only allowed during intermittent operation (max. 6 sec/min)