SCPD 76/76 DIN

SCPD 76/76 DIN is a dual flow pump with two separate flows of equal sizes.

SCPD 76/76 DIN gives a maximum flow of 33.7 + 33.7 = 67.4 GPM and supports a maximum working pressure of 5076 psi. It can effectively be directly mounted on gear boxes equipped with engageable and disengageable power take-offs. SCPD 76/76 is a modern, compact pump, which meets the market's high demands on flow performance, pressure, efficiency and small installation dimensions. It is speed optimized and therefore supplied for either left (L) or right (R) rotation direction.

Datasheet

Installation guide

Product Benefits

Large displacement gives the possibility of low engine speeds and low noise levels.

Long life due to high demands on material selection, such as bearings, seals, etc.

O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power takeoff.

Highest displacement-to-size-ratio on the market.

Technical specifications

SCPD 76/76 DIN
Theoretical oil flow, A+B at pump speed
rpm	1000* 1500	GPM 19.8+19.8=39.6 29.7+29.7=59.4
Displacement
cu in/rev		4.58 + 4.58
Max pump speed
rpm	continuous intermittent	1500 1700
Max working pressure
psi		5076
Weight
lb		51.1
Moment of inertia (x 10^-3)
lb-ft-sec²		14.8
Tare-weight torque (M)
lb-ft		25.4
Theoretical power at pressure and pump speed
rpm	1000* 1500	2901 psi 33.5+33.5=67.0 hp 50.3+50.3=101 hp	3526 psi 42.0+42.0=83.9 hp 62.9+62.9=126 hp	5076 psi 58.7+58.7=117 hp 88.0+88.0=176 hp
Nominal torque on pump shaft at different pressures
		2901 psi 176+176=353 lb-ft	3526 psi 220+220=440 lb-ft	5076 psi 308+308=617 lb-ft
Direction of rotation
Left (L) or Right (R)