SLPD 20/20-64/32 DIN

SLPD 20/20-64/32 DIN is a series of in-line dual flow pumps with extremely low noise levels for demanding mobile hydraulics.

SLPD 20/20-64/32 DIN comes in eight different sizes, where three models feature differentiated flows. Pumps with differentiated flow increase the field of application as they can provide three different flows: one small, one large and one combined flow. Maximum pressure is 4785 - 5075 psi, depending on the model. Its slim pump housing makes direct mounting on the power take-off possible in very confined areas. SLPD 20/20-64/32 DIN is also ideal for installation using a frame bracket via an intermediate shaft.

Datasheet

Installation guide

Product Benefits

Independent direction of rotation

A cost effective total solution in relation to a conventional installation using two pumps in a splitter gear box

Smooth operation over the entire speed range

Long life due to high demands on material selection, such as bearings, seals, etc.

O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off

Extremely low noise emission over entire speed and pressure ranges

Technical specifications

SLPD 20/20-64/32 DIN		20/20	28/28	40/20	35/35	56/28	46/46	53/53	64/32
Theoretical oil flow GPM at pump speed
rpm	500 1000 1500	2.7+2.7=5.4 5.4+5.4=10.8 8.1+8.1=16.2	3.6+3.6=7.2 7.3+7.3=14-6 10.9+10.9=21.8	5.4+2.7=8.1 10.8+5.4=16.2 16.1+8.1=24.2	4.5+4.5=9.0 9.0+9.0=18.0 13.4+13.4=26.8	7.3+3.6=10.9 14.5+7.3=21.8 21.8+10.9=32.7	6.0+6.0=12.0 12.1+12.1=24.2 18.1+18.1=36.2	6.9+6.9=13.8 13.9+13.9=27.8 20.8+20.8=41.6	8.3+4.2=12.5 16.7+8.3=25.0 25.0+12.5=37.5
Displacement
cu in/rev		1.24+1.24	1.68+1.68	2.48+1.24	2.07+2.07	3.35+1.68	2.79+2.79	3.21+3.21	3.85+1.92
Max pump speed
rpm		2200	1800	2200	2200	1800	1800	1600	5075
Max working pressure
psi		5075	5075	5075	4785	5075	4785	4785	5075
Weight
lb		48.5	48.5	48.5	48.5	48.5	48.5	48.5	48.5
Tare-weight torque (M)
lb-ft		19.5	19.5	19.5	19.5	19.5	19.5	19.5	19.5
Direction of rotation
Independent