SLPD 40/20-64/32 SAE

SLPD 40/20-64/32 SAE is a series of in-line double pumps with extremely low noise levels for demanding mobile hydraulics.

SLPD 40/20-64/32 SAE pumps are equipped with shafts and flanges according to the SAE-C standard. They are available in six different sizes. It´s slim pump housing enables direct installation on the power take-off in very confined spaces. SLPD is also easy to install with frame mountings via an intermediate shaft. The high level of reliability is based on the choice of materials, hardening methods, surface structures and the quality assured manufacturing process. Maximum pressure is 4785 - 5075 psi, dependent on model.

Product Benefits

 

Independent direction of rotation

A cost effective total solution in relation to a conventional installation using two pumps in a splitter gear box

Smooth operation over the entire speed range

Long life due to high demands on material selection, such as bearings, seals, etc.

O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off

Extremely low noise emission over entire speed and pressure ranges

Technical specifications

SLPD 40/20-64/32 SAE 40/20 35/35 56/28 46/46 53/53 64/32
Theoretical oil flow GPM at pump speed
rpm 500
1000
1500
5.4+2.7=8.1
10.8+5.4=16.2
16.1+8.1=24.2
4.5+4.5=9.0
9.0+9.0=18.0
13.4+13.4=26.8
7.3+3.6=10.9
14.5+7.3=21.8
21.8+10.9=32.7
6.0+6.0=12.0
12.1+12.1=24.2
18.1+18.1=36.2
6.9+6.9=13.8
13.9+13.9=27.8
20.8+20.8=41.6
8.3+4.2=12.5
16.7+8.3=25.0
25.0+12.5=37.5
Displacement
cu in/rev 2.48+1.24 2.07+2.07 3.35+1.68 2.79+2.79 3.21+3.21 3.85+1.92
Max pump speed
rpm   2200 2200 1800 1800 1600 1600
Max working pressure
psi 5075 4785 5075 4785 4785 5075
Weight
lb 48.5 48.5 48.5 48.5 48.5 48.5
Tare-weight torque (M)
lb-ft 19.5 19.5 19.5 19.5 19.5 19.5
Direction of rotation
Independent

Maximum pressure combined with maximum speed is only allowed during intermittent operation (max. 6 sec/min)

Accessories

Application examples

Media